First Sign One Step  Pregnancy Test Midstream  

Instructions

Please read all instructions before doing the test.

1. Do not use after the expiration date printed on the package.
2. Store in a dry place at 4-30°C or 40-86°F. Foil pouch should be at room temperature before opening.
3. Do not freeze.
4. Keep out of the reach of children.
5. For in vitro diagnostic use. Not to be taken or used internally.
6. Do not open the test foil pouch until it has reached room temperature and you are ready to start the test.

How to Use the Test

1. Remove the midstream test from the foil pouch

2. Remove the Cap

4.   Note: Do not urinate on the Test and Control windows. If you prefer, you can urinate into a clean and dry container, then dip only the Absorbent Tip of the midstream test into the urine for at least 10 seconds.

5. After removing the midstream test from your urine, immediately replace the Cap over the Absorbent Tip, lay the   midstream test on a flat surface with the Test and Control windows facing upwards, and then begin timing.

6. As the test begins to work, you may notice a light red flow moving across the Test and Control windows. Wait at least 3 minutes for the red line(s) to appear. If no red line appears, wait one minute longer. Some positive results may be observed in 1 minute or less depending on the concentration of hCG.

7. Do not read the result after 10 minutes .  

How to Read the Results

	PREGNANT The presence of two red lines, one line in the test window (T) and one line in the control window (C), means you are probably pregnant. One line may be lighter than the other, they do not have to match.
	NOT PREGNANT The presence of one red line in the control window (C) means you are probably not pregnant.
	INVALID RESULT The result is invalid if no red line appears in the control window (C), even if a line appears in the test window (T). You should repeat the test with a new midstream test.

  Caution